Customer had some very expensive “High-End” RCA cables that were failing. The ends were pulling off, the shrink was not covering what it should. They were a mess! Opened them up to find cold solder joints weird construction because the wire is so thick… We solved all the problems and go them looking preaty!

We are always up for a special request! This one is for a DB9 male to single female XLR. This is for an Apogee Mini-DAC. It uses the DB9 for two AES inputs, but the customer only needs one. This is made with Mogami W3080 and includes orange shrink and boot.

As a custom cable shop, we are happy to fill any need. This one was for a customer who needed to pull the snake through a conduit and wire to a panel they already have. So here is a Mogami W2936 24-channel snake with one end cut and the other end wired to DB25 connectors.

Here is a special cable for a Quant Asylum QA403 audio analyzer. It splits pin 2 to one BNC and pin 3 to the other BNC. It was custom-made with Mogami W2964 and Neutrik connectors. If you want to purchase one, click here!

300 Ft cable? Yes, no problem! (Mogami W2552 with Neutrik XLR connectors)

We have had four-pin XLR cables on the site for years, but this is a special request with Mogami 2549 and a right-angle XLR. It is for the DPA 4012 high-voltage mic. It uses a 4-pin XLR but only three wired pins. This will be an amazing cable for that application! Features Mogami wire and Neutrik connectors.

Happy Birthday to us!!! Wow, 23 years! It has been a great ride so far, and we plan to keep on rolling. Thank you to all our great customers. Without you, we would not be here today!

We can customize the custom! Here is a two-channel snake where the customer needed one fanout channel longer than the other. Made with Mogmai snake wire and Neutrik connectors.